www.heinner.com 2500W, 50/60Hz, 220-240V
18
\
VII.
CLEANING AND MAINTENANCE
The heater requires regular cleaning to ensure trouble free operation:
1. Do not stand or drop the heater and treat it carefully at all times.
2. Always turn off and unplug the heater from the mains supply before cleaning.
3. Use a damp cloth to wipe the exterior of the heater to remove dust and dirt.
4. Ensure the heater is dry before plugging back into the mains supply.
5. Do not allow water to run into the interior of the heater as this could create a fire or
electric shock hazard.
Storage:
If the heater is not required for long periods, for example during the summer, it should be
stored in a dry place and preferably covered to prevent the accumulation of dust and dirt.
Unplug the heater and store the mains lead in the storage recess provided. Ensure that the
plug does not trail on the floor where it could be damaged.
Overheating protection safety device
Your heater is fitted with a safety overheat device to switch off the heater in the event of
overheating. If for any reason the appliance is operated in an abnormal situation or
condition which would otherwise have induced a rapid temperature rise to constitute a
hazard ,the overheat protection safety device should intervene by cutting off the supply
current before the temperature reaches the point at which damage may occur. If the
overheating protection safety device is operating properly, the appliance will stop heating.
No attempt should be made to repair it or have it repaired locally.
In the event of the safety overheat device operating, the appliance will cease to function.
No matter should be made to repair it or have it repaired locally and safety device supplied
must never be replaced other than by the manufactured since the specialized components
are not generally available.
