www.heinner.com 2500W, 50/60Hz, 220-240V
16
VI.
USING THE PANEL
1. Plug the heater power cord directly into a standard outlet, turn power cord ON,
which is under cord wrap. The red power indicator light.
2. Power button: Press the ON/OFF, the default setting is
Ⅱ
heating setting, The
default setting temperature on display panel is 30
℃
, the green power indicator
light. Y
ou can set power setting by “+””-” button. The symbol
will
flash based on your choices.
3. Mode button: Press Mode button
and Timer symbol
will flash. You
can set timer b
y “+””-” button
，
from 1h,2h, to 9 h. Press Mode button again
and the symbol
for temperature setting function will flash. You can set
temperature by “+””-” button and the scale is 5
℃
-35
℃
.
4. Child lock: Press child lock button for 5 seconds will activate the lock function,
during the lock, the button on control panel will not be available. Press child
lock for 5 seconds again will turn off lock function.
5. ECO function: Press ECO button directly until the ECO symbol
on display
panel flashed. When you enter into ECO mode, the unit will run 10min for high
setting and run 30min for low setting alternately under the default setting
temperature of 25
℃
. If t ambient temperature is higher than 25
℃
, the unit will
stop to heat. Press ECO button again to turn off ECO function
6. Appointed function: Plug in the power cord and not press the power button,
only red indicator light, press the Mode button can activate reservation
function. The timer symbol will flash at this time, then you can set time by “+”
or ”-” button, from 1h,2h, to 9 h. When the time Countdown finished, the unit
will operated automatically. The power light become green and timer light will
disappear. Press Model button again when timer setting flashing, you can
enter the appointed temperature setting by
“
+
”
”
-
”
button and the scale is 5
℃
-35
℃
.
7. Power switch
：
when you press power switch the unit will stop working.
