Heinner HMSF-D3WH, Инструкция по эксплуатации

Страница: 23 / 49

www.heinner.com 40W, 50Hz, 220-240V
22
3. Oscillation Control
To make the fan oscillate, press the clutch knob located on the top of the motor
housing. To get the directional airflow, pull the clutch knob up to its initial position.
4. Tilt Adjustment
To adjust the air flow upward or downward, push the grilles lightly to the desired
direction.
5. Height Adjustment
The height of the fan can be adjusted by loosening the height adjustment ring,
carefully raising or lowering the fan and firmly re-tightening the height adjustment
ring.
BATTERIES INSTRUCTIONS (batteries not included)
1. Press down on the battery compartment cover and slide it out.
2. Insert the batteries, making sure that the positive terminals are facing the proper
way.
3. Replace the cover.
Use manganese or alkaline batteries of type "AAA". Do not use rechargeable batteries.
BATTERY WARNING
1. Do not dispose of batteries in fire, batteries may explode or leak.
2. Do not mix old and new batteries.
3. Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium)
batteries.
Remote controller
AAA Battery, 1.5V
Battery cover