Heinner HIS-D3007IX, Руководство пользователя

Страница: 26 / 56

www.heinner.com 3000W, 50/60Hz, 220-240V
6. Follow the operation as below to store the steam supply hose and power cord along
the cord winding groove: firstly, fold the steam supply hose in two and wind it along the
cord widing groove, then fix it at the cord widing groove; secondly, fold the power cord
in two and wind it along the cord widing groove, then fix it at the cord widing groove
(See Fig.5).
IRONING TIPS
-Always check first whether a label with ironing instructions is attached to the article.
Follow these ironing instructions in any case.
-The iron heats up quicker than cooling it down, therefore, you should start ironing the
articles requiring the lowest temperature such as those made of synthetic fiber.
-If the fabric consists of various kinds of fibers, you must always select the lowest ironing
temperature to iron the composition of those fibers.
-Silk and other fabrics that are likely to become shiny should be ironed on their inner
side.
-Velvet and other textures that rapidly become shiny should be ironed in one direction
with light pressure applied. Always keeps the iron moving at any moment.
-Pure wool fabrics (100% wool) may be ironed with the steam iron. Preferably set
temperature dial to the third position and use a dry cloth as a mat.
- Never iron over zip, rivet in the cloth. This will damage the soleplate. Iron around any
such object.
NOTE: When ironing woolen fabrics, shining of the fabric may occur. So it is suggested
that you should turn the article inside out and iron the reverse side.
Fig. 5