Heinner HIS-D3007IX, Руководство пользователя

Страница: 24 / 56

www.heinner.com 3000W, 50/60Hz, 220-240V
4. Turn temperature dial to your desired setting, which is depended on the fabric of
garment, and the temperature indicator will illuminate. The iron starts heating. Refer to
“IRONING TIPS” and “ADDITIONAL TABLE” as below when select temperature.
5. The water in the steam generator will be heated, after a few minutes, the temperature
indicator will extinguish, it indicates the soleplate temperature has achieved the selected
temperature. When the indicator of defaulted steam rate changes from flashing to
illuminating, it indicates that the iron is ready for ironing garment with steam.
6. Press the steam trigger with a little force, the steam will be sprayed from the soleplate
continuously, and then you can iron the garment with steam. When need to remove
tough wrinkle, press the steam trigger twice within 1 second to activate the shot of
steam.
Note: There may be dripping water during spraying steam when the temperature is at
and lower than the second setting. This is normal.
Caution:
1) Do not touch hot soleplate at any time before cooling down!
2) Never direct the steam at people!
7. After ironing, press down the power switch for about 2 seconds, the appliance will be
turned off and all the indicators will extinguish. Remove the plug from the wall socket. But
the soleplate is still hot, never touch it with hand, place it on the thermal insulation stand
until it cools down completely.