Heinner HIS-D3007IX, Руководство пользователя

Страница: 25 / 56

www.heinner.com 3000W, 50/60Hz, 220-240V
Before cleaning, firstly disconnect the power outlet and let the appliance cools down.
1. Wipe flakes and any other deposits on the soleplate with a damp cloth or a
non-abrasive (liquid) cleaner.
NOTE: Do not use chemical, steel, wooden or abrasive cleaners to scrape the soleplate.
2. Clean the upper part of iron with a soft damp cloth. Wipe the water drop on the
steam station iron and the thermal insulating cushion with dry cloth.
3. To remove the mineral deposits collecting at inner steam generator, follow the
operation as below: firstly reverse the unit base and place it on a level surface
horizontally, make sure that the unit base shall be placed stably, then cover a towel on
the knob and rotate the knob with the towel to detach it, after it, drain the steam
generator, then refill the steam generator with clean water to clean it well (see Fig. 4).
WARNING: To avoid a risk of scald, make sure the steam generator has been cooled
down completely before removing the knob.
Bottom of unit base
4. After drainage, tighten the knob and make the unit base stand again.
5. When do not use the appliance for a long time, pour out the water in the tank, and
put the iron on the thermal insulation stand and then push the iron lock to “ ”
position to lock the iron well .
Note: The whole steam station can be lifted up by grasping the iron’ s handle after the
iron being properly locked on the unit base.
VI. MAINTENANCE AND CLEANING
Knob
Fig. 4