Heinner HIS-D2403BL, Руководство пользователя

Страница: 20 / 45

www.heinner.com 2400W, 50-60Hz, 220-240V
4. Connect the plug to wall outlet, together with one beep can be heard. And then press
down the Power button, the power indicator starts to illuminate, also the low steam level
regarded as defaulted one and its indicator will flash. And you can select other steam level
by pressing the steam level control button according to your requirement. When being
selected, its corresponding indicator will flash.Make sure that there is enough water in
the tank.
5. Turn temperature dial to your desired setting, which is depended on the fabric of
garment, and temperature indicator will illuminate. Refer to IRONING TIPS latter.
6. The water in the tank will be heated, after a few minutes, the temperature indicator
will be extinguished, which indicates the soleplate temperature has achieved the selected
temperature. And when the indicator of selected steam level has been changed flashing
to illuminating, it indicates you can take out of the iron and iron the garment with steam
by pressing the steam trigger of the iron.
Caution:
1) Do not touch hot soleplate at any time before cooling down!
2) Don’t emit the steam directly to the people.
7. During operation, if there is less water in the tank, the lack of water indicator will be
illuminated, following with two beeps can be heard. At that time, you should refill the
water tank through the filling aperture or move out of the water tank to refill it. After it,
press the reset button to reactivate the steam release function.
8. After finish ironing, press and hold the Power button for a while, following with one
beep can be heard, and the appliance will be turned off and all the indicators will be
extinguished. Or you can put the iron the thermal insulating cushion, if there is no steam
sprayed out from the soleplate within 10 minutes, the appliance will be turned off
automatically. Remove the plug from the wall socket. But the soleplate is still hot, never
touch it with hand, place it on the thermal insulating cushion until it cools down
completely.
IRONING TIPS
-Always check first whether a label with ironing instructions is attached to the article.
Follow these ironing instructions in any case.
-The iron heats up quicker than cooling it down, therefore, you should start ironing the
articles requiring the lowest temperature such as those made of synthetic fiber.
-If the fabric consists of various kinds of fibers, you must always select the lowest ironing
temperature to iron the composition of those fibers.
- Synthetic fibre and silk fabrics should be ironed on their inner side to avoid being shone.
-Velvet and other textures that rapidly become shiny should be ironed in one direction
with light pressure applied. Always keeps the iron moving at any moment.
-Pure wool fabrics (100% wool) may be ironed with the steam iron. Preferably set
temperature dial to the third position and use a dry cloth as a mat.
- Never iron over zip, rivet in the cloth. This will damage the soleplate. Iron around any
such object.
NOTE: When ironing woolen fabrics, shining of the fabric may occur. So it is suggested
that you should turn the article inside out and iron the reverse side.