Heinner HIS-D2403BL, Руководство пользователя

Страница: 18 / 45

www.heinner.com 2400W, 50-60Hz, 220-240V
Temperature dial
Turn the dial to set ironing temperature to meet the garment changed.
Temperature indicator
When the iron is heating up, the temperature indicator will be illuminated. Once the iron
has reached the selected temperature, it will extinguish. The temperature indicator will be
cycled on and off as the iron maintains the selected temperature during ironing.
Steam trigger
After pressing down the Power button and choosing the desired steam level, it indicates
the steam can be used for ironing until the corresponding steam level indicator is changed
flashing to illuminating. At this time, press the steam trigger with a little force, the steam
will be sprayed from the soleplate continuously. When loosen the steam trigger, the
appliance can only be used for dry ironing without steam.
Lack of water indicator
If less water in the tank, the indicator will be illuminated, following with two beeps can be
heard, the steam generator stops working. It prompts you need to add water into the
tank.
Reset button
If less water in the tank, the lack of water indicator will be illuminated, at that time, you
need to refill the water tank. After refill the water tank with water, press the reset button
once to make the lack of water indicator be extinguished and then you can release steam
for ironing.
Descaling indicator & De-calc box
If the descaling indicator illuminates, it indicates the mineral deposits in the de-calc box
has been collected to a degree and you should replace the de-calc box in time.
Cord clamp
When not in use, the steam supply hose and power cord shall be stored. Pull out the cord
clamp first, after winding the cord around the unit base, push the cord clamp back.