Heinner HEM-1100CR, Инструкция по эксплуатации, Страница: 23 / 60

www.heinner.com 1100W, 50Hz, 220-240V
22
9. After water has flown for 20S, press the pump control button “ ”. The pre-heating is
finished.

FOR ESPRESSO COFFEE
1.
Remove the funnel by turning it clockwise.
2. Add ground coffee to steel mesh with measuring spoon, a spoon ground coffee power
can make about a cup of top-grade coffee, then press the ground coffee powder tightly
with the tamper.
3. Set steel mesh into metal funnel (no coffee in steel mesh), then put the metal funnel
under the metal funnel holder (see Fig. 1) and turn it anticlockwise until it is fixed tightly
(see Fig. 2 and Fig. 3).
4. Pour out the hot water in the cup. Then place the hot cup (yourself cup) on removable
cup shelf.
5. Make sure the steam control knob is at the minimum position, and the coffee/steam
button is on the higher position.
6.
At the time, the ready indicator (green) is illuminated, once the green lamp illuminates,
you should press down the pump control button to the lower position which is the “ ”
position, wait a moment, there will be coffee flowing out.
7. You should press and release the pump control button to the higher position which is the
“
” position manually when desired coffee is obtained or the colour of coffee changes
weak obviously.
8. After finishing making coffee, press the ON/OFF button “ ”, and the power indicator and
ready indicator go out and the coffee maker stops working, your coffee is ready now.
WARNING: do not leave the coffee maker unattended during making coffee, as you need
operate manually sometimes.
Note: During brewing coffee or making steam, it is normal that the ready indicator is likely to
extinguish, it only means that the heater is heating up to keep the temperature at the
standard range.