31
Electrical connection
Before plugging in, ensure that the voltage and frequency shown on the rating plate
correspond to your domestic power supply. The appliance must be earthed. The power
supply cable is provided with a contact for this purpose. If th domestic power supply
socket is not earthed, connect the appliance to a separate earth in compliance with
current regulations, consulting a qualified electrician. The manufacturer declines all
resposability if the above safety precautions are not observed.
This appliance complies
with the E.E.C. Directives.
First use
Cleaning the interior
Before using the appliance for the first time, wash the interior and all internal accessories
with lukewarm water and some neutral soap so as to remove the typical smell of a brand
new product, then dry thoroughly.
Important! Do not use detergents or abrasive powders, as these will damage the finish.
Temperature setting
Electrical connection
When the appliance is plugged in, all LED indicator lights will flash once. Then the
appliance will resume the mode previously set before the electrical outage.
Temperature Setting
•
Setting: Press
“
SET
”
button, enter the temperature setting mode. The
temperature indicator bar of temperature goes up a scale by each press. This
setting runs in cycles. Temperature can run from Scale MIN to Scale MAX. Scale
MAX is the coldest. The temperature is automatically set in 5 seconds after last
press.
•
Super Freezing
•
Press
“
SET
”
button consecutively to enter
“
SUPER
”
freezing mode from Scale
MAX, the indicator bar on the left hereby will turn dark whereas the indicator
light of
“SUPER” turns on. This mode is
automatically set in 5 seconds after last
press.
•
The compressor keeps working in
“
SUPER
”
freezing mode.
If the
“
SUPER
”
mode keeps running for 52 hours and not stopped manually, the system
will automatically cut out this mode, with the temperature back at Scale 5.
