7
To further optimize the performance of your unit, do the following:
• Keep doors and windows closed.
• Limit energy usage by using TIMER ON and TIMER OFF functions.
• Do not block air inlets or outlets.
• Regularly inspect and clean air filters.
For a detailed explanation of each function, refer to the Remote-Control Manual.
Other Features
Auto-Restart
If the unit loses power, it will automatically restart with the prior settings once power
has been restored.
Follow me
Using Follow Me feature, the remote display is actual temperature at its location. The
remote control will send this signal to the air conditioner every 3 minutes interval until
press the Follow Me button again. The air conditioner will cancel the Follow Me feature
automatically if it does not receive the signal during any 7 minutes interval.
Self clean
Active / Disable self clean function. After running in cooling or drying mode, if the user
press “Self Clean” button on remote controller, firstly, indoor unit runs in fan only mode
for a while, then low heat operation and finally runs in fan only again. This function can
keep the inside of indoor unit dry and prevent breeding of mold.
Louver Angle Memory
When turning on your unit, the louver will automatically resume its former angle.
Refrigerant Leakage Detection
The indoor unit will automatically display “EC” The “timer” indicator light turns off and
the “run” indicator light flashes 7 times when the unit detects refrigerant leakage.
For a detailed explanation of your unit’s advanced functionality (such as TURBO mode,
Silence and 8˚ heating functions), refer to the Remote Control Manual.
