Heidolph Hei-VAP Advantage, Руководство по эксплуатации

Страница: 44 / 114

Assembly
Vapor temperature sensor, AUTOaccurate sensor
Vapor temperature sensor
(Optional accessory, Hei-VAP Advantage only
AUTOaccurate sensor
(Glassware set G and G and upgrade to Hei-VAP Precision only
Opening for vapor temperature sensor
and AUTOaccurate sensor is located at the
bottom of the condenser. Opening vapor temperature sensor
Remove sealing cap of condenser.
Insert vapor temperature sensor into
condenser.
Tighten vapor temperature sensor with
screw cap.
Plug in connector plug with white mark
upwards into receptacle on the left
side of unit.
Screw cap vapor temperature sensor
Connector plug vapor temperature sensor
vaporating ask angle and depth
vaporating ask angle
Evaporating ask angle can be adjusted by turning the drive.
Rotation is set to 0 rpm.
Evaporating ask is mounted (see chapter “Operation , section “Mount evaporating
ask ).
Hold condenser with your left hand.
Slide locking mechanism on lift pillar to
the right and hold it against the spring
force.
Move condenser carefully until
connected evaporating ask has the
correct angle.
Release locking mechanism.
If necessary move condenser slightly
until it locks in.
Lift pillar Locking
DOMINIQUE DUTSCHER SAS