Heidolph Hei-VAP Advantage, Руководство по эксплуатации

Страница: 43 / 114

Assembly
Inlet tubes
Assembly parts:
2x Inlet tube
1x Inlet valve
On the bottom left side of the condenser a ground opening is located to include stopcock
with inlet tube.
Inlet tube 1
Shorten supplied PTFE tube so that
the end of the tube leads to the
evaporating ask and attach it to the
stopcock.
Slide drain disk onto PTFE tube so that
it is placed below the vapor opening of
condenser.
Condensed uid cannot ow back into
evaporating ask through inlet tube.
Unscrew screw cap from condenser.
Slide seal ring and screw cap approx.
3 cm onto PTFE tube.
Insert PTFE tube with seal ahead into
inlet opening and tighten screw cap.
Inlet valve
Inlet tube 1
Drain disk
Screw cap Vapor tube
Ventilation cap
Inlet tube 2
Unscrew the screw cap including the
seal ring of inlet opening.
Slide seal ring and screw cap approx.
3 cm onto PTFE tube.
Insert PTFE tube with seal ahead into
inlet opening and tighten screw cap.
Inlet tubes are mounted.
Inlet valve
Inlet tube 2
Screw cap
Inlet tube 2
Inlet tubes glassware set G1
Openings for inlet tubes are located on the
top of the condenser.
Screw cap inlet tube 2
G1: Screw cap inlet tube 1
DOMINIQUE DUTSCHER SAS