Heidolph 506-21100-00, Руководство по эксплуатации

Страница: 46 / 65

47
Commissioning
Safety function
(Only relevant and available operating the device with an external temperature sensor,
see also section „Operation with external temperature sensor“, page 51.)
If the safety function is activated, the heating function is automatically switched off
when the sensor detects a sudden drop in temperature or when the measured tempera-
ture rises too slow.
By default, the safety function is activated. The function can be activated or deactivated
via the device settings:
➜ Open device settings (see section „Open the settings menu“, page 45)
➜ Set
SAF
to
off
to disable the function
➜ Set
SAF
to
on
to activate the function
Sensor calibration
(Only relevant and available operating the device with an external temperature sensor,
see also section „Operation with external temperature sensor“, page 51.)
The calibration function can be used to set the connected temperature sensor according
to the specific ambient conditions in your laboratory.
The sensor calibration function is only available when a compatible temperature sensor
is connected. To calibrate the connected temperature sensor, follow these steps:
➜ Immerse the sensor in the reference sample
➜ Open device settings (see section „Open the settings menu“, page 45)
➜ Select parameter
CAL
➜ Adjust the displayed temperature value as desired
The value is retained until a new calibration is performed.