HEIDENHAIN ND 5023 Скачать руководство пользователя

Страница: 9 / 126

4.2.3

Mounting in a mounting frame

The mounting frame allows you to mount the product in a

panel.
Mount the rear plate of the frame to the VESA 100 tapped

holes on the rear panel of the product

Use a 2.5 mm allen wrench to tighten the screws M4 x

6 ISO 7380 included in delivery
Comply with the permissible tightening torque of 2.6

Mount the rear plate and the product to the front plate of

the frame

Use a 7 mm socket wrench to tighten the nuts M4 ISO

10511 included in delivery
Comply with the permissible tightening torque of 3.5

Mount the frame and readout in the panel

Refer to the mounting instructions provided with the

mounting frame for panel cutout and mounting

information

Further information:

"D", Page 4

Dimensions of the mounting frame
Further information:

"I", Page 126

4.2.4

Mounting a cover

The cover protects the product from dirt and debris.
Place the cover on the product

Place the cover over the product
Align the cover and product on the right hand side,

when viewing the front of the product

Mount the cover to the product

Remove the adhesive strip protectors from the

adhesive tabs
Fold the adhesive tabs toward the product
Press the adhesive tabs against the product securing

the tab to the product

Installation

5.1

Overview

This chapter contains all the information necessary for

installing the product.

The following steps must be performed only by

qualified personnel.

Further information:

"Personnel qualification", Page 7

5.2

General information

NOTICE

Engaging and disengaging connecting elements!

Risk of damage to internal components.

Do not engage or disengage any connecting

elements while the unit is under power

NOTICE

Electrostatic discharge (ESD)!

This product contains electrostatic sensitive

components that can be destroyed by electrostatic

discharge (ESD).

It is essential to observe the safety precautions for

handling ESD-sensitive components
Never touch connector pins without ensuring proper

grounding
Wear a grounded ESD wristband when handling

product connections

NOTICE

Incorrect pin assignment!

This may cause product malfunctions or damage to the

product.

Only assign pins or wires that are used

HEIDENHAIN | ND 5023 | Installation Instructions | 09/2018

Содержание ND 5023































































































































Результаты поиска

Содержание ND 5023

Отзывы:

Похожие инструкции для ND 5023

Бренды по названию

Популярные бренды

HEIDENHAIN ND 5023, Руководство по установке

Результаты поиска

Содержание ND 5023

Отзывы:

Похожие инструкции для ND 5023

Бренды по названию

Популярные бренды