HEIDENHAIN ND 5023 Скачать руководство пользователя

Страница: 7 / 126

Transport and storage

3.1

Overview

This chapter contains all of the information necessary for

the transportation and storage of the product and provides

an overview of the items supplied and the available

accessories for the product.

3.2

Unpacking

Open the top lid of the box
Remove the packaging materials
Unpack the contents
Check the delivery for completeness
Check the delivery for damage

3.3

Items supplied and accessories

Items supplied

The following items are included in the shipment:

Product
Single-Pos stand
Rubber feet
Cover
Installation instructions
Addendum (optional)

Further information:

"Notes on reading the docu-

mentation", Page 5

Accessories

The following items are optionally available and can be

ordered from HEIDENHAIN as additional accessories:

Accessories

Part number

Single-Pos stand

For rigid mounting, inclination

angle 20°

1197273-01

Multi-Pos holder

For fastening on an arm, continu-

ously tiltable and swivelable

1197273-02

Mounting frame

For mounting to a panel

1197274-01

Cover

For protection from dirt and debris

1197275-01

3.4

In case of damage in transit

Have the shipping agent confirm the damage
Keep the packaging materials for inspection
Notify the sender of the damage
Contact the distributor or machine manufacturer for

replacement parts

In case of damage in transit:

Keep the packaging materials for inspection
Contact HEIDENHAIN or the machine

manufacturer

This applies also if damage occurred to

requested replacement parts during transit.

3.5

Repackaging and storage

Repackage and store the product carefully in accordance

with the conditions stated below.

Repackaging

Repackaging should correspond to the original packaging

as closely as possible.

Attach all mounting parts and dust protection caps to

the product or repackage them in the same way they

were originally shipped from the factory.
Repackage the product such that it is protected from

impact and vibration during transit
Repackage the product such that it is protected from

the ingress of dust or humidity
Place all accessories that were included in the

shipment in the original packaging

Further information:

"Items supplied and accessories",

Page 9

Include the Addendum (if it was included in the items

supplied), the Installation Instructions and the

Operating Instructions

Further information:

"Storage and distribution of the

documentation", Page 6

If you return the product for repair to a service

agency:

Ship the product without accessories,

without measuring devices and without

peripherals

Storage of the product

Package the product as described above
Observe the specified ambient conditions
Inspect the product for damage after any transport or

longer storage times

HEIDENHAIN | ND 5023 | Installation Instructions | 09/2018

Содержание ND 5023































































































































Результаты поиска

Содержание ND 5023

Отзывы:

Похожие инструкции для ND 5023

Бренды по названию

Популярные бренды

HEIDENHAIN ND 5023, Руководство по установке

Результаты поиска

Содержание ND 5023

Отзывы:

Похожие инструкции для ND 5023

Бренды по названию

Популярные бренды