Gas fired igniter ZT0
Transport, packaging and storage
- 16 -
Status: 11-2018
3.3
Packaging
Packaging
The individual products are packaged in accordance with the
transport conditions expected for the consignment. Exclusively
environmentally friendly materials are used for the packaging.
The packaging should protect the individual components from
transport damage, corrosion and other damage up until such time
as they are assembled. For this reason, do not destroy the
packaging and only remove it shortly before assembly.
Handling packaging materials
If no outline agreement has been reached for packaging, separate
the materials according to type and size, and send for re-use or
recycling.
NOTE!
Environmental damage due to incorrect
disposal!
Packaging materials are valuable raw materials
and in many cases can be reused or usefully
processed and recycled.
– Ensure environmentally responsible disposal of
packaging materials.
– Observe locally applicable disposal regulations.
3.4
Storage conditions
Storage
Store the gas fired igniter and the spare parts under the following
conditions:
Never keep outdoors.
Store in dry, dust-free conditions.
Do not expose to any corrosiv substances.
Avoid any drop in temperature below the dew point.
Protect the gas fired igniter from mechanical damage.
Storage temperature: 0 °C to 60 °C
Relative humidity: max. 60 %
When storing for longer than 3 months, regularly check the
condition of all parts and the packaging. If necessary refresh or
replace the conservation.
REMARK!
The packaging units may come with storage
instructions applicable in addition to the
requirements outlined here. These must be
adhered to.
