Heco ASCADA 2.0, Важные указания по установке и гарантийный талон

Страница: 12 / 44

12
OPERATIONAL ELEMENTS
LED status indicator for the active speaker (Fig. 1)
(1) STBY/PAIR:
• Red: Standby mode
• Blue, flashing quickly: Bluetooth input active, device in pairing mode
(2) BLUETOOTH:
• flashing slowly: Bluetooth input active, no connection to the source device
• permanently illuminated: Bluetooth input active, connection to the source device established
(3) OPT/COAX:
• orange: coaxial digital input active
• white: optical digital input active
(4) USB AUDIO
(5) AUX IN
(6) Remote sensor
PLEASE NOTE: The status LED on some inputs will start to flash slowly shortly after they have been selected if a device
is not connected or a compatible signal is not detected.
Side controls of the active speaker (Fig. 2)
(7) Rotary/push button for source selection and volume control
(8) Controller to boost / reduce the bass level
(9) Controller to boost / reduce the treble level
Rear controls of the active speaker (Fig. 3)
(10) Power switch
(11) Mains voltage selector switch
(12) Mains connection
(13) Fuse
(14) USB charging port
(15) Stereo USB input
(16) Optical digital input
(17) Coaxial digital input
(18) Stereo input Eingang (RCA jack)
(19) Output for connecting an active subwoofer
(20) Connection for the left passive speaker
ATTENTION: The loudspeaker is equipped with an integrated amplifier and needs to be connected to a mains outlet by
means of the supplied mains cable. The voltage selector (11) has been set at the factory to 230 V for operation in Europe.
Warning: Connecting the loudspeaker to a 230 V mains outlet while the voltage selector is set to 120 V will lead
to immediate destruction of the amplifier!