background image

6

If you have any doubts about adjustments to your 
motorcycle, refer to the manual and/or contact an 
authorised TRS dealer.

Please carefully read through the information in the 
user manual to familiarise yourself with the features 
of your motorcycle before driving it using the maxi-
mum power settings.

• A running-in period of at least 8-10 hours without 
driving at high speeds or full throttle is advised, in 
order to allow the engine to bed in. In these first 
hours, drive at a moderate speed only.

• Fuel is a highly inflammable liquid. Use caution 
when refuelling and always¬ turn off the engine 
first.
• Before running the engine at high speed, it is im-
portant to let it reach an optimum operating tempe-
rature, especially when starting up the motorcycle 
or in low temperature conditions.

• This motorcycle uses two-stroke synthetic oil 
mixed with 1% 98 octane fuel. Do not use any other 
kind of lubrication without previously checking 
with an authorised TRS mechanic.

• This motorcycle is designed to carry just one per-
son, and it is not permitted to carry a passenger.

• For a long life of service, keep the motorcycle 
maintained as recommended¬ in this manual.

• This bike is designed to be safe when driving, pro-
vided that the driver is equipped with the appro-
priate safety equipment (helmet, protective clo-
thing, etc.). Be careful and drive sensibly.

TRS recommends:

Содержание TRS ONE 2021

















































Отзывы: