17
6 - Starting and stopping the engine
7 - Choke
/
STARTING AND STOPPING THE ENGINE
SWITCH ELECTRIC START
CHOKE
The Stop button is positioned on the left-hand side of
the handlebar, close to your thumb for easy use.
Use the choke when the engine is cold to help star-
ting without damaging the engine. This device, used
correctly, will prevent wear and mechanical damage
by starting the motorcycle in adverse temperatures. It
is operated by a black lever located in the carburettor.
b) Stop button, to the left of the handlebar
c) Kill switch, to the right of the handlebar
f) Choke, in the carburettor
d
It is a safety element, so that , in the event of the pilot
falling, the motorcycle is disconnected. Make sure that
the rider puts the elastic band on the left wrist and is
firmly secured, before starting the motorcycle.
a) Electric start switch button, on the right side handlebar
NOTE:
1) Before starting the motorcycle, fold the side
stand.
2) Hold the lever clutch
3) Make sure that the gear shift is in neutral.
4) Choke - unlock black lever when engine is hot
5) Press the
E
lectric start switch button until the
engine starts. Do not hold the button down for
longer than 10 ‘‘.
If the engine does not start, check the
troubleshooting at the end of this document.
b
f
a
