28
19 - Air Filter
Check if cleaning or replacement is necessary when you
find cracks or damaged on foam. Before mounting, it
is recommended to grease the filter with Air filter extra
protection from Nils. This will help fix the smallest dust
particles.
To insert the filter, slide through the center of the spring
until it is fixed at the midpoint. The filter must stay in the
center of the intake hose. Assemble the baffle and filter
cover, in this order.
SPARK PLUG
AIR FILTER
It is important to maintain the gap stipulated by
TRS of 1mm between the electrode and the arc to
ensure optimum engine performance.
Its colour tells you whether you are using the right car-
burettor setting:
Very white colour: very poor mixture.
Very black colour: too fuel at mixture.
a) The plug that is factory-ins-
talled is defined in the techni-
cal specifications. Tighten to
11Nm.
18 - Spark plug
1mm
b) Top view of the cover of air filter case.
b
a
/
It is very important to check the air filter after every
riding. Correct maintenance will allow you to achieve
perfect operation, better engine performance and lon-
ger life of your motorcycle as well.
To access the air filter, you must remove the cover lo-
cated on top of the filter box. Remove the countersunk
screw located on the front. (Fig. B)
You will find the filter box baffle. This is piece Channel
the air flow and reduce dirt on the air filter. Remove the
allen screw to access the air filter. (Fig. C)
To remove the air filter (fig. D) move the spring
back and remove the filter upwards.
b) Removing the cover, you can access the air box baffle;
c) Air box baffle.
b
c
d
