15
SETUP BEFORE USING
For safety reasons, motorcycles TRRS with Electric Start are delivered wi-
thout fuel and oil (only when the transport is air and maritime transport) ,
and with the ground connector disconnected to prevent ocurrance during
transport. Follow the instructions below for seeting up the motorcycle.
1. Location of the groundconnector, protected with electrical tape. Then
proceed to connect the ground connector to the chassis. Take off the tape of
the ground connector.
2. Insert the ground connector with the bolt togheter and tighten with an 8
mm wrench to the plate support.
-430 ml Electric
start version (refilled in 380ml)
recommends
5 - Unboxing , set up
2
1
TOMA DE MASSA /
GROUND CONNECTOR