Heatrae Sadia HRU ECO 4, Руководство пользователя

Страница: 15 / 28

3.2. Devices
1 2
5
The ventilation unit has several pre-programmed modes.
A number of control switches are available for active
adjustment to the right mode/ventilation capacity:
1. Wireless control switch with three settings and timer
function.
2. Wireless control switch with two settings, automatic
mode and timer function.
3. Wired three-position switch for installation.
A combination of the above options.
You can pair a maximum of 20 wireless control switches
and/or sensors with a Heatrae Sadia ventilation unit or
system.
3.3. Sensors
The ventilation unit can be controlled by the following
available sensors:
●
RFT CO
2
sensor; 230 V
●
RFT RV sensor; battery-powered
●
RF-PIR BAT battery-powered.
For pairing or unpairing a wireless sensor with the unit,
see Pairing and unpairing wireless devices and sensors on
page 15.
3.4. Pairing and unpairing wireless
devices and sensors
3.4.1. Pairing wireless devices
Pairing a wireless control switch should be done in the
vicinity of the ventilation unit.
a) Switch off power to the ventilation unit, wait
15 seconds, and then switch on power again.
b) Within two minutes, press two diagonally opposite
buttons at the same time on the control switch.
The control switch is now paired with the ventilation unit.
For information about pairing and unpairing optional
controls, see the documentation included with the
controls.
3.4.2. Unpairing RF devices
Unpairing a wireless control switch should be done in the
vicinity of the ventilation unit.
a) Switch off power to the ventilation unit, wait
15 seconds, and then switch on power again.
b) Within two minutes, press the four buttons of the
control switch at the same time.
Now the ventilation unit will no longer respond to the
control switch(es). Unpairing one control switch
automatically unpairs all switches, controls and sensors.
15