Heatrae Sadia 7037042 Скачать руководство пользователя страница 20

20

11. Warranty

11.1 General

The Multipoint warranty provides a high level of 

customer support and peace of mind in the unlikely 

event that a problem arises from a manufacturing 

defect. It is supported by a nationwide team of field-

based engineers and our own call centre.

The warranty covers appliances installed in domestic 

and commercial properties for the following periods:

 

`

Stainless steel storage vessel and connections - 

10 years 

 

`

Cold water control valves supplied with the 

appliance - 2 years

 

`

Expansion vessel supplied with the appliance - 2 

years

 

`

Immersion heater assembly - 2 years

 

`

Electrical controls as factory fitted to the appliance 

- 2 years

The warranty periods apply from the date of purchase 

and include both parts (where supplied by Heatrae 

Sadia) and labour.

This warranty is valid for installations within the United 

Kingdom. For installations in the Republic of Ireland 

please contact Potterton Myson (Ireland) Limited on 

+353 (0) 1 4590870 for warranty terms and conditions 

applicable. For installations outside of the United 

Kingdom and the ROI please contact Heatrae Sadia 

Export on +44 1603 420271 for warranty terms and 

conditions applicable.

This warranty does not affect your statutory rights.

11.2 Warranty conditions

The warranty is given provided that the following 

conditions have been met:

 

`

The appliance has been installed by a competent 

installer in accordance with the instructions 

contained in this manual and in compliance with 

all relevant laws, guidance, codes of practice and 

regulations in force at the time of installation.

 

`

The appliance has not been modified or tampered 

with in any way, other than by Heatrae Sadia or 

authorised engineers.

 

`

The appliance or any part or parts of the appliance 

(whether factory fitted or otherwise) have not been 

repaired or replaced other than by a Heatrae Sadia 

authorised engineer and any replacement parts 

used on the appliance are authorised Heatrae 

Sadia spare parts.

 

`

The  factory  fitted Temperature  &  Pressure  Relief 

Valve has not been tampered with or removed.

 

`

The appliance has not been subject to damage 

caused by the build up of scale.

 

`

The appliance has not been subjected to frost or 

freezing temperatures.

 

`

The appliance has not been subjected to misuse 

or neglect.

 

`

The appliance has not been subject to wilful or 

accidental damage caused by your negligence.

 

`

Regular maintenance has been carried out by a 

competent person or a Heatrae Sadia authorised 

engineer in accordance with the maintenance 

requirements set out in this manual. 

 

`

The appliance has not been installed in areas 

where the water supply contains chloride levels 

which exceed 250mg/l.

 

`

The appliance is registered within 60 days of 

purchase. This can be done by telephone, online 

or by using the registration form supplied with the 

appliance.

 

`

The appliance has not been affected by any cause 

beyond our reasonable control including, without 

limitation:  an  act  of  God,  explosion,  flood,  fire  or 

accident; war or civil disturbance; strike, industrial 

action or stoppages of work; any form of government 

intervention; a third party act or omission including 

theft or malicious damage; failure by you to give 

us a correct delivery address or notify us of any 

change of address.

11.3 Water supply requirements

This appliance must only be used for the storage 

of wholesome water. The storage of water from 

supplies not meeting the requirements of the Water 

Supply (Water Quality) Regulations will invalidate the 

warranty. Any disinfection procedure must be carried 

out in accordance with BS EN 806 and the complete 

system be thoroughly flushed following application of 

any disinfection solution. 

11.4 Claims under warranty

In order to claim against the warranty the following 

should be noted:

 

`

Defects should be reported to Heatrae Sadia as 

soon as you are aware of them. Please report any 

defect to Heatrae Sadia by contacting 0344 871 

1535.

 

`

Evidence of purchase (for example a receipt) and 

date of supply is submitted when making a claim.

 

`

Access should be available, at reasonable times 

and upon reasonable notice, to the appliance to 

allow any inspection, repair or replacement.

 

`

The appliance should not be removed from its 

place of installation so a Heatrae Sadia authorised 

engineer can assess the complete installation.

11.5 Exclusions

The following exclusions apply:

 

`

Any third party repair or replacement costs, unless 

those costs have been agreed and authorised by 

Heatrae Sadia in writing prior to incurring those 

costs, will not be met.

 

`

Heatrae Sadia accepts no liability for any third 

party damage, any indirect and consequential 

losses and any loss of earnings, loss of business, 

or losses in relation to stress and inconvenience, 

howsoever caused.

Содержание 7037042





























Отзывы: