Heatmiser UH6, Руководство по установке

Страница: 11 / 20

Model: UH6
Inserting Actuator Cables
3rd Actuator: Use the upper right side L & N connections.
Clamp the insulated part of the cable in the cable grips
by pushing upwards.
Bend the actuator wires around & insert the Neutral wire
into the upper N connection. Then insert the Live wire
into the upper L connection. As shown in image 3.
4th Actuator:
Use the upper left side L & N connections.
Clamp the insulated part of the cable in the cable grips
by pushing upwards.
Bend the actuator wires around & insert the Neutral wire
into the upper N connection. Then insert the Live wire
into the upper L connection. As shown in image 4.
Repeat this process for all other zones, any outputs that are not needed can be ignored.
Each zone output has connections for up to 4 x 230v actuators.
1st Actuator: Use the lower left side L & N connections.
Clamp the insulated part of the actuator cable in the
cable grips by pushing upwards.
Bend the actuator wires around & insert the Neutral wire
into the lower N connection. Then insert the Live wire
into the lower L connection. As shown in image 1.
2nd Actuator: Use the lower right side L & N connections.
Clamp the insulated part of the cable in the cable grips
by pushing upwards.
Bend the actuator wires around & insert the Neutral wire
into the lower N connection. Then insert the Live wire
into the lower L connection. As shown in image 2.
10