Understanding the Features
The installer should read the following features and then setup
the thermostat accordingy to the features required.
Temperature Format: Select between
°
C or
°
F
Switching Differential: This is the number of degrees the heating
switches back on below the set temperature.
Temperature Calibrate: The thermostat is calibrated from the
factory, but you can use this function to calibrate if required.
Frost Mode: You can set whether the thermostat will maintain the
frost temperature even when the thermostat has been turned off
with the power button. As a default, this is enabled.
Frost Protection Temperature: This is used to set the required
frost temperature. The range is 07 - 17
°C
Output Delay: To prevent rapid switching, an output delay can be
entered. This can be from 00 - 30 minutes.
9
