Understanding the Features (Cont)
Optimum Start: Optimum start will delay the start up of the heating
system to the latest possible moment, to avoid unnecessary
heating, so that the dwelling is comfortably warm by the
programmed time.
Rate of Change: This setting is calculated by the thermostat.
Air Sensor Selection: (Mode 01 Only, See Page) You can select
whether the air sensor used is the one built in to the thermostat or a
remoteair probe.
Floor Limit Sensor (In mode 01 Only, See Page ) The floor sen-
sor is used to protect the floor surface. During normal operation, the
thermostat will maintain the air temperature from the room sensor,
but should the floor temperature limit be exceeded the heating will
turn off. This setting allows you to enable / disable the floor limit
function.
Floor Temperature Limt: 20-45
°
C (Mode 01 Only, See Page )
10
