Understanding the Features
Mode
The PRT-E has two modes available.
00 = Floor Only. In this mode a single remote floor sensor is used to
maintain a desired floor temperature. The programmed settings
relate to the floor temperature only. Air temperature is not
monitored in this mode.
01 = Air & Floor. In this mode, two sensors are used. The
programmed settings relate to the air temperature and the floor
sensor is used only to prevent the floor surface from overheating. A
floor limiting temperature can be programmed in this mode, and
should this temperature be exceeded, the heating will be switched
off - even if the desired air temperature has not be achieved.
11
