Heatmiser NeoAir V2-M, Руководство пользователя

Страница: 39 / 48

Re-calibrating the Thermostat
E0 = The internal sensor has developed a fault.
E2 = The remote probe has not been connected.
The remote probe has not been wired correctly.
The remote probe is faulty.
In thermostat modes 1 or 3, an error code will appear if a fault is detected with the
built in or remote sensor probe..
Error Codes
To re-calibrate the temperature reading, follow these steps.
•
• Press and hold and Down arrow keys together for 10 seconds................
• The current temperature will appear on the display.
• Use the Up / Down keys to configure the new temperature value .............
• Press the key to confirm the change and the display will go blank ......
• Press the down arrow to highlight the
..........................................................
• Press the key once to turn the thermostat ON .............................................
38
Air
-M
neo
Use the Left arrow key to highlight on the menu ..................................................
• Press and hold for 3 seconds to turn off the display ...........................................
The thermosat will return to the main display reading the new temperature.