Heatmiser NeoAir V2-M, Руководство пользователя

Страница: 14 / 48

13
Series
neo
Pairing with the RF-Switch 16 Amp
• Use the Left arrow key to highlight on the menu ...................................................................
• Press and hold for 3 seconds
..............................................................................................................
• SETUP is now highlighted, press once to access the setup menu.................................
• The display will show the number 01 in the top right hand corner.
• Press the Down arrow key once, P1 is displayed
in the top right corner..............................
• Press once .....................................................................................................................................................
• The display will start counting down from 99, pairing mode is now active on the neoAir..
On the neoAir:
On the RF-Switch 16 A:
• Press and hold the pair button for 5 seconds, the pair light will start flashing, pairing
mode is now active on the RF-Switch.
• Once the RF-Switch detects the pairing signal from the neoAir, the pair light will turn off.
• Pairing complete.
On the neoAir:
• Press to confirm pairing, this will exit the setup menu and return to the main
display.................................................................................................................................................................................
Configure the neoAir in mode 1, as explained on page 7, then follow the steps below.