10
4031-117 Rev I
02/04
NOVUS DIRECT VENT INSTALLATION INSTRUCTIONS
2. Rear Vent
a.
Fold the tabs toward the center of the fire plug
(90°) and remove the insulation gasket. See
Figure 11.
Figure 11 - Bending Tabs
d.
Discard the vent cap, remove and discard the
insulation basket. See Figure 14.
Figure 14 - Vent Cap and Insulation Basket
e.
Attach the first vent section (it will snap into place).
Slide the insulation gasket onto the vent section,
up against the appliance and over the tabs. See
Figure 15.
Figure 13 - Remove the Vent Cap
c.
Fold the center parts of the retaining band out
and use to remove the vent cap. See Figure 13.
b.
Cut the metal retaining band (Figure 12) and fold
the sides out.
Figure 12 - Cut the Retaining Band
Figure 15 - Attach the First Vent Section