Heatilator • Novus NBV • 4055-188 Rev C • 04/08
25
12
12
Appliance Setup
A. Remove the Packaging
Remove the shrink
fi
lm, corrugated top cap, bottom cap and
column protectors from the appliance. The appliance should
look as shown in Figure 12.1.
Figure 12.1 Appliance Unwrapped
Figure 12.2 Open Access Flap
Figure 12.3 Lift up on Screen
Figure 12.4 Rotate Screen Open
B. Open Front Screen Assembly
• Open
the
fl
ap in the upper left hand corner of the screen
protector (Figure 12.2)
• Pick up on the screen to release the screen from
the shoulder screws in the fireplace columns. See
Figure 12.3.
• Rotate the screen open as shown in Figure 12.4.
C. Remove the Shipping Materials
Remove the shipping materials from inside or underneath
the
fi
rebox.
D. Remove Fixed Glass Assembly
See Section 12.N.
E. Clean the Appliance
Clean/vacuum any sawdust that may have accumulated in-
side the
fi
rebox or underneath in the control cavity.
F. Accessories
Install approved accessories per instructions included with
the accessories. Refer to Section 16.
WARNING! Rick of Fire and Electric Shock!
Use ONLY
Hearth & Home Technologies-approved optional accesso-
ries with this appliance. Using non-listed accessories could
result in a safety haza4d and will void the warranty.
