03/04
35048 Rev L
19
IB75 B-VENT GAS APPLIANCE
M. LOG REMOVAL/REPLACEMENT
1.
Remove the lava rock from the appliance and save.
2.
The top log is placed over the pins in the back log.
3.
For removal of the front grate/log assembly remove two screws (one per side) from the hearth pan. See Figure 24.
Pull up on the assembly to remove it from the firebox and set it aside, being careful not to damage any of the logs. See
Figure 25.
4.
To remove the back log, remove three screws and carefully lift the log off. See Figure 26.
5.
Reverse the order to reinstall the logs.
Figure 24
Unscrewing the Log/Grate Assembly
from the Hearth Pan
Figure 25
Log Removal
Figure 26
Back Log Removal
Figure 27
Air Shutter
Note:
Be sure to place the burner tube onto the burner orifice as shown in Figure 27.
