40
E. Combustible Mantel
• Refer to shaded areas of Figure 11.4 for locations and dimensions of a combustible mantel.
• A combustible mantel may be positioned no lower than 12 in. (305 mm) above the top of the fireplace opening.
• A combustible mantel may have a maximum depth of 12 in. (305 mm).
• Combustible trim and materials cannot be placed within 6 in. (152mm) of the fireplace opening (top or sides).
• Combustible materials projecting more than 1 1/2 in. (38 mm) shall not be placed within 12 in. (305 mm) from the top of
the fireplace opening.
• Combustible trim must not cover the metal surfaces of the fireplace.
• Mantel clearance is in accordance with
Section 7-3.3.3
of
ANSI/NFPA211
.
Mantel
7 ft (2134 mm)
minimum
base of fireplace
to ceiling
Combustible Wall
2 x 4 stud wall
Standoffs
Measured from top of fireplace opening
12 in./305 mm
1 1/ 2 in./38 mm
maximum
6 in./152 mm
minimum
6 in./152 mm
minimum
12 in./305 mm
minimum
Combustible
Decorative Facing
Non-combustible
Decorative Facing
such as: Steel, iron,
brick, tile, concrete,
slate, glass, plasters
Seal joint with
non-combustible
sealant
Figure 11.4 Clearances to Mantels or other Combustibles above Fireplace
Heat & Glo • HST-42D • 27177 • Rev AF • 1/11
