12-97
5i
28887A
C. FRAMING
Figure 3
Framing
Figure 3 shows a typical framing of this appliance
using combustible materials. All required clearances
to combustibles must be adhered to.
CAUTION
WEAR GLOVES AND SAFETY GLASSES
FOR PROTECTION.
CAUTION
PROVIDE ADEQUATE CLEARANCES
AROUND THE AIR OPENINGS INTO THE
COMBUSTION CHAMBER AND ADEQUATE
ACCESSIBILITY CLEARANCES FOR SER-
VICING AND PROPER OPERATION.
D. SETTING THE UNIT
1. Positioning the firebox
This appliance may be placed on a smooth
combustible or noncombustible continuous, flat
surface. When the appliance is installed direct-
ly on carpeting, tile or other combustible material
other than wood flooring, the appliance shall be
installed on a metal or wood panel extending the
full width and depth of the appliance.
Slide the
unit into position and level the appliance from
side-to-side and front-to-back. Shim with noncom-
bustible material as necessary.
Secure the appliance by bending out the nailing
flanges on each side of the appliance and nail to
framing. The nailing flanges have been positioned
5/8" back from the front of the unit to allow the addi-
tion of drywall.
Model 36" Series 42" Series
A
42
1
/
4
"
48
1
/
4
"
*** from base of appliance