12-97
11i
28887A
Figure 12
Electronic Ignition Wiring Diagram
STEP 8 - Wiring
Detailed Picture of Junction Box
A. ELECTRONIC IGNITION
1. Appliance Requirements. This appliance requires a
110VAC supply from a wall switch to the appliance junction
box for operation. A wiring diagram is shown in Figure 12.
2. Optional Accessories Requirements. Wiring for optional
accessories should be done now to avoid reconstruction.
Wa r n i n g
: This appliance DOES NOT require
a 110VAC supply for operation. Connecting
the appliance/wall switch to a 110V AC supply
will cause the unit to malfunction and destroy
the valve and thermopile.
B. STANDING PILOT IGNITION
1. Appliance requirements. A wiring diagram is shown in
Figure 13.
2. Optional Accessories Requirements. Wiring for optional
accessories should be done now to avoid reconstruction.
Note: This appliance must be electrically
wired and grounded in accordance with local
codes or, in the absence of local codes, with
National Electric Code ANSI/NFPA 70-latest
edition or the Canadian Electric Code, CSA
C22.1.
Detailed Picture of Junction Box
Figure 13
Standing Pilot Wiring Diagram