12-97
13i
28887A
1. Upper Panel Removal
Lift upward on the upper panel and pull out.
2. Attaching the Hood
Hood must be attached or a fire hazard may result.
The hood is to be located above the upper grille
panel. Locate the four screws just inside the upper
section of the fireplace. Loosen these screws, posi-
tion the hood and tighten the screws. See Figure 15.
Figure 15
Hood Placement
H. FIREBOX PREPARATION
Remove the straps from the screws on the hearth
pan. Remove the foam material. The log set should
look similar to that in Figure 16.
Figure 16
Log Set for 36” CALIBER
(Shown with optional refractory)
4. Firebox Preparation
3. Glass and Screen Removal
See page 7 of the “Operating and Maintenance
Instructions.”