Heatilator CNXT4236IH-D Скачать руководство пользователя страница 9

Страница: 9 / 78

Heatilator • CNXT4236IT-D, CNXT4842IT-D, CNXT4236IH-D, CNXT4842IH-D • 2360-900 Rev. i • 5/17

Figure 2.1 General Operating Parts

B. Your Fireplace

WARNING!

DO NOT operate fireplace before read

ing and understanding operating instructions.

Failure

to operate fireplace according to operating instructions

could cause fire or injury.

DECORATIVE DOORS

(NOT SHOWN)

SECTION 2.E.

FIXED GLASS ASSEMBLY

(NOT SHOWN)

SECTION 14.H.

MANTEL

SECTION 5.D

HEARTH

(not required)

FAN KIT

SECTION 2.C.

CLEAR SPACE

SECTION 2.D.

GRATE

SECTION 3.C.

A. Gas Fireplace Safety

Operating Instructions

User Guide

Young children should be carefully supervised when they

are in the same room as the appliance. Toddlers, young

children and others may be susceptible to accidental

contact burns.

• A physical barrier is recommended if there are at risk

individuals in the house.

• To restrict access to a fireplace or stove, install an

adjustable safety gate to keep toddlers, young children

and other at risk individuals out of the room and away

from hot surfaces.

• Install a switch lock or a wall/remote control with child

protection lockout feature.

• Keep remote controls out of reach of children.

WARNING!

DO NOT operate fireplace before reading

and understanding operating instructions.

Failure

to operate fireplace according to operating instructions

could cause fire or injury.

• Never leave children alone near a hot fireplace, whether

operating or cooling down.

• Teach children to NEVER touch the fireplace.
• Consider not using the fireplace when children will be

present.

Contact your dealer for more information, or visit: www.

hpba.org/safety-information.

To prevent unintended operation when not using your fire

place for an extended period of time (summer months,

vacations, trips, etc):
•  Remove batteries from remote controls.
•  Turn off wall controls.
•  Unplug 6 volt transformer plug and remove batteries on

IPI models.

• Turn off gas controls valve on standing pilot models.

When lighting the pilot light on fireplaces with a standing

pilot, remove the fixed glass assembly so you can de

tect presence of residual gas build-up. See Standing Pilot

Lighting instructions and Maintenance Tasks.

A barrier designed to reduce the risk of burns from the

hot viewing glass is provided with this appliance and

shall be installed for the protection of children and other

at-risk individuals. DO NOT operate the appliance with

the barrier removed. If the barrier becomes damaged,

the barrier shall be replaced with the manufacturer’s

barrier for this appliance.

Contact your dealer or Hearth & Home Technologies if the

barrier is not present or help is needed to properly install one.

DANGER

HOT GLASS

WILL

CAUSE BURNS.

DO NOT TOUCH

GLASS

UNTIL COOLED.

NEVER

ALLOW CHILDREN

TO TOUCH GLASS.

• Keep children away.

• CAREFULLY SUPERVISE children in same room

as fireplace.

• Alert children and adults to hazards of high

temperatures.

High temperatures may ignite clothing or other

flammable materials.

• Clothing, furniture, draperies, and other flammable

materials must not be placed on or near the

appliance.

Содержание CNXT4236IH-D















































































Результаты поиска

Содержание CNXT4236IH-D

Отзывы:

Heatilator CNXT4236IH-D, Руководство пользователя, Страница: 9 / 78

Результаты поиска

Содержание CNXT4236IH-D

Отзывы: