Heath Consultants Odorator 2, Руководство оператора

Страница: 14 / 28

10
20. When testing is complete, close the gas supply outlet valve, disconnect the sample hose
from the gas supply outlet and verify the Flow Metering Valve is closed finger tight only. Do
not store the sample hose in the instrument’s case. A mesh bag attached to the handle is
included for sample hose and fittings storage.
Bluetooth
**NOTE**
Bluetooth hardware is installed and configured but connectivity is not supported.
A future firmware and OdorSeer / OdorSeer Remote release will provide support.
ODORATOR 2 Operator Controls and Connectors
Figure 1. ODORATOR 2 Top Panel Layout
1. Accessory door/pull knob
2. Gas inlet
3. Mini USB 2
4. Flow metering valve
5. LCD
6. Charge LEDs 7. Keypad
8. Alarm
9. GNSS antenna
10. Blower intake
11. Exhaust Port