Heath Consultants Odorator 2, Руководство оператора

Страница: 10 / 28

6
errors are detected,
then “ERR” and an error number will be displayed and held.
4.
Optionally a “LO BAT” message and beep may appear.
5. Instrument model type and model. Example: METHANE 1.00%
6. User ID number if configured.
7.
Operator name if configured. If not configured, “NO USER” will display.
8. Actual UTC Date.
9. Actual UTC Time.
10. Calibration Date.
11.
Optionally a “CAL” message and beep may appear to inform the operator of an
upcoming or past due calibration.
12.
“CAL OK”.
13. A live reading display in % Gas unit. The actual battery capacity will be shown
on the bar graph on the left side of the display.
The turn-on sequence will generally take 20
– 30 seconds to complete.
Test Mode Sequence:
After turning on and successfully passing an internal diagnostics self-test, the instrument test
mode sequence will be as follows:
1. Conditioning Mode. A Flow Self-Test may be performed in Conditioning Mode.
2. Zero.
3. Odor Threshold Detection Level (TDL) test.
4. Odor Readily Detectable Level (RDL) test.
5. Optional Relative Odor Intensity test.
6. Purge Mode (configurable via OdorSeer).
7. Sleep (configurable via OdorSeer).