TX Series Installation, Operation, and Maintenance Manual
Diversified Heat Transfer, Inc.
439 Main Road, Route 202
Towaco, New Jersey 07082
Page
11
of
33
Phone: 800-221-1522
Website: www.dhtnet.com
2.
Domestic Water
a.
Cold Water In
. Install brass tee and drain valve (not provided). Install shutoff valve
between water supply and cold water inlet for ease of service as shown in the exhibit
below.
b.
Standard Domestic Hot Water Out
. A heat trap will improve energy efficiency by
reducing piping heat loss.
Thermostatic Mixing Valve
At times a thermostatic mixing valve may be recommended or required. The thermostatic mixing valve
blends domestic cold water with hot water exiting from the heater, to yield a more constant desired
temperature. Risk of scalding is not eliminated with the use of a thermostatic mixing valve. Refer to
literature provided by valve manufacturers for recommended installation.