OPERATIONS & CONTROLS
8
1 On/Off Button
2 Fahrenheit & Celsius
3 Up and Down Arrows
3 Up and Down Arrows
1 Fahrenheit & Celsius
2 On/Off Button
CONTROL
PANEL
CONTROL
PANEL
9
OPERATIONS & CONTROLS
POWER
● Once the heater is plugged into the outlet it will be in standby mode.
● The On/Off button needs to be pressed in order to turn on the heater and operate the
remote control.
● The power is automatically adjusted by the built-in program and works as follows
1. If the room temperature is 1 °F or 1 °C higher than the preset temperature, it
switches off all heating power, but the On/Off light will remain on(red) and the leaf
light be off.
2. If the room temperature is 1 °F or 1 °C lower than the preset temperature, it will
turn on all heating elements (full power), the On/Off light will be red, and the leaf
light is On(red).
3. If the room temperature is between upper temp and lower temp, it switches on only
one group of heating elements (half power), the On/Off light will be red, and the leaf
light is On(green)
For instance:
Preset temperature: 72 °F
If room temperature is 74 °F, no heating (no power)
If room temperature is 71 °F, or 72 °F, or 73 °F, half heating power (green leaf)
If room temperature is lower than 71 °F (70 °F, 69 °F....) , full power (red leaf)
SELECTING CELSIUS AND FAHRENHEIT
● By pressing the “UP” and “DOWN” buttons at the same time for 3 seconds you can set
the heater to function and display in Celsius or Fahrenheit.
NOTE: Switching between Celsius and Fahrenheit can only be performed using the
Control Panel on the heater and is not available using the remote control.
MODEL# :
HS-1000-WX
HS-1000-WA
MODEL# : HS-1500-PHX
