WALL INSTALLATION
FEET INSTALLATION
(Models HS-1000-WA only)
6
1
2
3
1. Use the included level
to ensure you mark the
guide holes correctly
1. Slide the two ends of the feet together so that the
holes align together. Align the hooks on the feet with
open slots at the bottom of the HS-1000-WA
2. Once the hooks have
been inserted into the slots
underneath the unit, gently
slide the feet back to lock
them into place. Begin
to thread the wing-nut
through the hole until it has
fully tightened.
3. To remove feet from
unit, unscrew the wing-nut
and Gently pull the feet
back and up from the unit
to unhook the feet.
3. Hang the heater onto
the screws
7
2. Drill holes for included
anchors. Insert included
anchors and screws
