Heat Storm HS-100-WX Скачать руководство пользователя страница 2

INTRODUCTION

Thank you and congratulations on your purchase of your 

Heat Storm

 Infrared heater. 

PLEASE READ THIS MANUAL BEFORE OPERATING THIS 

APPLIANCE.

WARNING

IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED, 

AN ELECTRIC SHOCK OR FIRE MAY RESULT CAUSING 

PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE.  

DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE 

VAPORS AND LIQUIDS IN THE VICINITY OF THIS OR ANY 

OTHER APPLIANCE.

WARNING 

ANY REQUIRED SERVICE OTHER THAN FILTER 

MAINTENANCE SHOULD ONLY BE PERFORMED BY AN 

AUTHORIZED SERVICE REPRESENTATIVE AND ANY OTHER 

REPAIRS ATTEMPTED BY ANYONE OTHER THAN AN 

AUTHORIZED SERVICE REPRESENTATIVE WILL VOID THE 

WARRANTY.

SAFETY AWARENESS

In order to avoid overheating, do not cover the heater.  It cannot be used in a wardrobe.
●  CAUTION: Whenever the heater is left operating and unattended, caution may be 

 

  necessary if children or invalids are nearby.
●  The appliance is not to be used by children or persons with reduced physical, sensory  

 

  or mental capabilities, or lack of experience and knowledge, unless they have been 

 

  given supervision or instruction.
●  Children being supervised should be instructed not to play with the appliance.
●  Always unplug heater when not in use.
●  Do not operate any heater with a damaged cord or plug or after the heater 

 

  malfunctions, has been dropped or damaged in any manner. Discard heater, or return to 

 

  authorized service facility for examination and/or repair.
●  If the supply cord is damaged, it must be replaced by the manufacture, its service agent 

 

  or similarly qualified persons in order to avoid a hazard.
●  Any repairs to this heater should be carried out by a qualified service person.
●  Under no circumstances should this heater be modified. Parts having to be removed for 

 

  servicing must be replaced prior to operating this heater again.
●  Do not use outdoors.
●  This heater is not intended for use in bathrooms, laundry areas and similar indoor 

 

  locations. Never locate heater where it may fall into a bathtub or other water container.
●  Do not run cord under carpeting. Do not cover cord with throw rugs, runners or similar 

 

  coverings. Do not route cord under furniture or appliances. Arrange cord away from 

 

  traffic areas and where it will not be tripped over.
●  To disconnect heater, turn controls to the off position, wait for the fan to stop blowing 

 

  to ensure the inside of the heater has been properly cooled, then remove plug

 

  from outlet.
●  Connect to properly grounded outlets only.
●  This appliance, when installed, must be electrically grounded in accordance with local 

 

  codes or, in the absence of local codes, with the current CSA C22.1 Canadian Electrical 

 

  Code or for U.S.A. installations, follow local codes and the National Electrical Code, 

 

  ANSI/NFPA NO.70. When using electrical appliances, basic precautions should always 

 

  be followed to reduce the risk of fire, electrical shock, and injury to persons including 

 

  the following:

3

2

Содержание HS-100-WX











Отзывы: