41
Heat & Glo • SUPREME-I25-IFT, SUPREME-I30-IFT, SUPREME-I35-IFT Installation Manual • 2532-980 Rev. E • 5/19
Figure 16. Log #5 Installed
LOG #5:
The non-burnout end of log 5 will sit on the flat spot of log 3. The corner of the other end will sit on the base
refractory grout line. See Figure 16.
3
5
Figure 15. Log #4 Installed
2
1
4
LOG #4:
Set the non-Y end of Log #4 on the flat spot of Log #1. The end of the log #4 will sit flush with the back of Log #1.
The Y-end of log #4 will sit on the flat spot of Log #2. See Figure 15.
LOG #3:
With the burnout of Log #3 facing left, set the large end against log pin D, place the small end on the flat spot of
Log #1. See Figure 14.
Figure 14. Log #3 Installed
1
2
3
D
GROUT LINE
4
