39
Heat & Glo • SUPREME-I25-IFT, SUPREME-I30-IFT, SUPREME-I35-IFT Installation Manual • 2532-980 Rev. E • 5/19
Figure 7. Log #5 Installed
LOG #5:
Place the non-bark end of log 5 on the flat spot of log 3. The front right corner on the other end of log 5 will sit at
the intersection of the grout lines on the base refractory. See Figure 7.
Figure 6. Log #4 Installed
Figure 5. Log #3 Installed
2
3
LOG #3:
With the burnout of Log #3 facing left, line the big end up with the edge of the basepan and the firebox wall or
refractory. The small end will sit half on the end of Log #2 and half on the air scoop as shown in Figure 5.
1
4
2
5
3
LOG #4:
The Y-end of Log #4 should sit on the flat spot of Log #2, the other end will sit on the flat spot of Log #1. See Figure 6
GROUT LINE
