background image

Heat & Glo  •  SLR-X-AU-L Owner’s Manual   •  2653-981 Rev. B  •  5/20  

2

Listing Label Information/Location

A. Congratulations

Congratulations on selecting a Heat & Glo gas fireplace, an 

elegant and clean alternative to wood burning fireplaces. 

The Heat & Glo gas fireplace you have selected is designed 

to provide the utmost in safety, reliability, and efficiency.
As the owner of a new fireplace, you’ll want to read and 

carefully  follow  all  of  the  instructions  contained  in  this 

owner’s manual. Pay special attention to all cautions and 

warnings.

This 

owner’s  manual

 

should  be  retained  for  future 

reference.  We  suggest  that  you  keep  it  with  your  other 

important documents and product manuals.
The information contained in this owner’s manual, unless 

noted  otherwise,  applies  to  all  models  and  gas  control 

systems.
Your new Heat & Glo gas fireplace will give you years of 

durable use and trouble-free enjoyment. Welcome to the 

Heat & Glo family of fireplace products!

Serial Number

Type of Gas

The model information regarding your specific fireplace can be found on 

the rating plate usually located in the control area of the fireplace.

Model Number

Model:  

Seri   a l  :

Heat & Glo, a brand of Hearth & Home Technologies 

7571 215th Street West, Lakeville, MN 55044

ASXXXX Certification Nº:  GMKXXXXX

Injector Size:.................................................................................................. DMS mm)
Inlet Gas Pressure:.................................................................................................. kPa
Outlet (Manifold) Gas Pressure:.............................................................................. kPa
Maximum Nominal Gas Consumption.................................................................... MJ/h
Electrical Rating........................................................................................240V 50hz 1A

This unit is designed to be recessed into framed construction.

TO BE

 

INSTALLED ON WOOD FLOORING OR NON-COMBUSTIBLE FLOORING.

See installation manual for details.

Gas Type:

MADE IN USA

XXXX-XXX

IAPMO-R&T

GasMark

TM

OCEANA

SSAAM

MPPLLEE

Read this manual before operating this appliance. 

Please retain this Owner’s Manual for future reference.

Read the Installation Manual before making any installation or finishing changes.

Welcome  

Brand:

 ________________________________________________

Model Name:

 ___________________________

Serial Number:

 __________________________________________

Date Installed:

 __________________________

Appliance Information:

Local Dealer Information

DEALER:

 

Fill in 

your name, address, 

phone and email 

information here and 

appliance information 

below.

Dealer Name: ________________________________________________________

Address: ____________________________________________________________

               ____________________________________________________________

Phone:   _____________________________________________________________

Email:    _____________________________________________________________

Содержание SLR-X-AU-L


































Отзывы: