HearthRite HRSQ25MV, Руководство пользователя и инструкции по эксплуатации

Страница: 15 / 32

15 Vent-Free Gas Stove User’s Manual
Log Placement
Check to ensure that no yellow flame comes in
contact with any log, both after installation and
periodically afterwards. Set the heater to HIGH and check if yellow
flames come into contact with any log. If so, reposition the logs as
indicated in the below illustrations. Yellow flames coming into
contact with logs create unnecessary soot.
CAUTION
Install the logs exactly as indicated (see Fig. 10–11). Do not modify
the logs, and use only logs supplied with the heater. The logs are
numbered and correspond to the numbers listed below.
Number of Logs: 5
1. Place log #1 on pins between burners
and log #2 and #3 on pins in front of burner.
2. Place log #4 onto pins in log #1 and #2.
Fig. 10
Failure to position the parts in accordance with these diagrams or failure to use only parts
specifically approved with this heater may result in property damage or personal injury.
WARNING
Fig. 11
Place log #5 onto pins in log #1 and #3.
After installing the logs, attach screen by hooking the slots on
the ends of the screen on the pins in the sides of the stove.
Note, logs are not shown for clarity.
The positioning of the logs is critical to the safe and clean operation
of this heater. Sooting and other problems may result if the logs are
not properly and firmly positioned in the appliance.