Hearth Products F-0710X1 series, Инструкция для пользователя, по установке и обслуживанию

Страница: 3 / 23


3
REGULATORY INFORMATION AND INSTALLATION REQUIREMENTS
THE FOLLOWING MUST BE NOTED PRIOR TO THE INSTALLATION OF THIS APPLIANCE.
This gas appliance MUST be installed by a GAS SAFE registered installer by law. It must be installed in
accordance to these installaon instrucons and the GAS SAFETY (Installaon & Use) REGULATIONS 1998 as
amended. Non compliance of this law may lead to prosecuon and it is in the interest of you and your
family that this condion is observed.
The installaon of this appliance must be in accordance with the relevant parts of the LOCAL AND
NATIONAL BUILDING REGULATIONS as issued by the Department of the Environment or BUILDING
STANDARD (Scotland Consolidaon) REGULATIONS issued by the Scosh Development Department and
the following relevant Brish Standards:
BS5871 Part 2 Installaon of Inset Live Fuel Effect Gas Fires
BS5440 Parts 1 & 2 Installaon of Flues and Venlaon
BS6891 Installaon of Gas Pipe-work
IS813:1996 Domesc Gas Installaon (Republic of Ireland)
Prior to installaon ensure that the gas supply is compable with the appliance, this appliance must only be
used on natural gas at a supply pressure of 20 mbar as marked on the data plate on the appliance and the
carton. Modificaon to alternave gas types is not possible with this appliance.
If the product is being installed into a mber framed building then advice should be sought specifically as
building alteraons may void any cover supplied by NHBC. If in doubt contact your local building and
planning authority. Further informaon can be obtained from the publicaon: Gas Installaons in Timber
Frame Buildings : IGE/UP/7 Edion 2.
The efficiency of this appliance has been tested to EN613 and the result is 86% net (78% gross). This
efficiency value has been verified by Kiwa (0558). This efficiency value can be used for SAP (Standard
Assessment Procedure) for energy rang of UK dwellings.

Venlaon
No purpose made venlaon is required for this appliance
This appliance must only be installed on to a suitable hearth with a minimum thickness of 12mm. The
appliance must not be installed directly onto carpet of other combusble floor materials. The fireplace
surround (back-panel) must have a temperature rang of at least 150
o
C.
Do not place so wall coverings (i.e. embossed papers etc,) furniture or other combusble items too close
to the fires as they may discolour or scorch.
Do not place or throw rubbish or otherwise on the fuel-bed.
Do not place any combusble materials or flooring (i.e. carpets etc,) on any part of the hearth.
It is very important that you arrange for a GAS SAFE registered engineer to service your appliance every
year – during this service the engineer will remove the appliance and check for debris, check the operaon
of the flue and check the operaon of the appliance. This is important for you and your families safety.
NEVER place more ceramic components onto the fuel bed than specified in the instrucons.
NEVER touch the glass panel or metal parts surrounding the glass when the fire is running or if it has
recently been in operaon—these components retain heat and may cause burns. Leave the appliance to
sufficiently cool prior to any contact.
WARNING: This appliance has very hot surfaces when in use and as with all heang appliances a fireguard
should be used for the protecon of children, the elderly, infirm and pets. The fireguard should conform to
BS8423 : 2002 (Fireguards or use with Gas Heang Appliances).
Important Note: It is quite normal for a flame effect gas appliance to experience a small amount of soot
or staining to some parts of the fuel effect components. If this becomes excessive it may because the fuel
bed is not fied correctly—this should be checked according to these installaon instrucons prior to
contacng a service engineer.