Hearth & Home Technologies • GFK-160VF Fan Kit Installation Instructions • 4136-920 • Rev C • 8/22
3
Removing Hood
1. Remove (2) screws securing the Hood to Columns, one
at each end. See Figure 8.
2. Remove (4) screws securing the Hood to Upper Face.
Set Hood aside. See Figure 9.
Figure 9
Removing Rear and Side Access Covers (LCUF models)
1. Remove (5) screws securing Rear Access Cover to fire
-
box. Lift Rear Access Cover to disengage from firebox
bottom. Set cover aside. See Figure 10.
Figure 10
Figure 8
Figure 11
Fan Kit Installation (BUF/ACUF/LCUF/IDOL Models):
Installing Temperature Sensor
1. Connect (2) 1/4” Female Connectors from supplied
Wire Harness to 1/4” terminals on back of the Tempera
-
ture Sensor.
2. Feed the Wire Harness through mounting hole, located
in the upper right corner of the firebox or appliance. See
Figure 12.
Refer to wiring diagram (Figure 19) for proper connections.
Figure 12
Figure 13
3. Locate the leading end of the wires through lower ac
-
cess hole and pull to center of access area.
4. Secure Temperature Sensor using (2) screws provided.
See Figure 13.
2. Remove (1) screw securing Side Access Cover to fire
-
box or appliance. Lift Side Access Cover to disengage
from Firebox Bottom. Set cover aside. See Figure 11.
